Wood Varnish
DESCRIPTION:
Gamma Wood Varnish is a high quality urethane based gloss varnish suitable for interior and exterior wooden substrates. It exhibits excellent adhesion, good covering properties and good wash ability. Clear and stain finish with super durable gloss.
USES:
As a finishing coat on alkyd paint systems for interior or exterior surfaces (Wooden Surfaces)
APPLICATION DETAILS
Application Method | Airless spray, Air spray, Brush or Roller |
Thinning Volume | 10‐25 % |
Re‐Coating Interval | Minimum 16 Hours |
SURFACE PREPARATION
Wooden Surface | Surface should be dry and clean from contamination, loose materials, oil and dust. Cracks should be filled with Globe Putty or any suitable filler. |
Maintenance | Loose old paint must be removed thoroughly. Remove oil and grease. Remove salt and contamination. |
* Recoating Interval was quoted for 28 – 30°C and at 60 – 65% Relative Humidity
PRECAUTIONS
1. | Kindly refer to MSDS for detailed safety measures while handling the paint. |
2. | Store the product in ambient conditions in well ventilated locations and away from source of ignition and fire. |
3. | Avoid eye and skin contact. In case it happens, wash with plenty of clean water. |
4. | Do not inhale or inject. In case of inhalation move to fresh air. |
5. | Use protective equipments like globes, safety glasses, face mask while handling the paint – this is required for all paint. |
6. | Do not apply when the ambient temperature is less than 100C or it might drop to this level within 4 hours of application. |
7. | Both white and tinted paints needs through shaking / mixing immediately before use. |
8. | Where ever dilution is necessary, use pure water. Adjust a viscosity of 30 – 40 sec for brush application and for other method use at 20 – 30 sec by Ford cup No. 4 |