Vinyl Matt Premium Emulsion
DESCRIPTION:
Gamma Vinyl Matt Premium Emulsion is a premium Interior and Exterior coating that delivers an outstanding performance which protects surfaces against stubborn elements. Cold and frosty or hot and humid, Vinyl Matt Premium goes on smooth and resists fading and peeling. It offers an outstanding adhesion and color retention. Provides a dirt-resistant and mildew-resistant coating.
USES:
Ideal for decorating and protecting interior / exterior surfaces to a wide verity of new or previously surfaces such as plaster, brickwork, cement, concrete etc. It can be applied to ceilings and wall surfaces where a matt finish is desired.
MAIN FEATURES:
- Exceptional hide, superior coverage, high durability, and outstanding washability.
- Provides luxury and smooth finish for Interior / Exterior
- Withstands the elements and resists frost, peeling, blistering, fading and cracking.
- Good resistance against fungus and mildew.
DIRECTION OF USE
Surface Preparation (New & Old) | New Plaster surfaces to be painted should be allowed to mature at least for a period of six weeks. Remove loose particles and rub slightly with emery paper. Ensure that surface is dry and free of dust, dirt, moisture etc. In case of repainting jobs, earlier coatings of emulsion paint need not to be removed if in sound condition. Otherwise slight sanding followed by wipe & clean is necessary before application. |
Interior (New Plaster) | Sand the surface with emery paper 180 and wipe clean. Apply one coat of Gamma Economy Emulsion by brush or roller followed by one coat of Impala Wall Putty filler using putty knife. Then do the sanding and clean the surface followed by 2 coats of Gamma Premium Vinyl Matt paint with a recoating* interval of 1 – 2 hours |
PRECAUTIONS
1. | Kindly refer to MSDS for detailed safety measures while handling the paint. |
2. | Store the product in ambient conditions in well ventilated locations and away from source of ignition and fire. |
3. | Avoid eye and skin contact. In case it happens, wash with plenty of clean water. |
4. | Do not inhale or inject. In case of inhalation move to fresh air. |
5. | Use protective equipments like gloves, safety glasses, face mask while handling the paint – this is required for all paint. |
6. | Do not apply when the ambient temperature is less than 100C or it might drop to this level within 4 hours of application. |
7. | Both white and tinted paints need through shaking / mixing immediately before use. |
8. | Use the recommended shades for exterior application. |
9 | Where ever dilution is necessary, use pure water. Adjust a viscosity of 30 – 40 sec for brush application and for other method use at 20 – 30 sec by Ford cup No. 4 |