Gamma Wood Glue
DESCRIPTION:
Gamma Wood Glue A PVA co-polymer based high viscosity and high solid wood glue which dries to a hard translucent film resistant to water.
USES:
A multi-purpose glue for wood bonding in furniture, doors, windows and wooden frames.
APPLICATION DETAILS
Application Method | Brush |
Thinning Volume | Product is ready for use if thinning is required 25% max. recommended. |
SURFACE PREPARATION
Wooden Surface | Surface should be dry and clean from contamination, loose materials, oil and dust. |
Maintenance | Loose old paint must be removed thoroughly. Remove oil and grease. Remove salt and contamination. |
* Recoating Interval was quoted for 28 – 30°C and at 60 – 65% Relative Humidity
PRECAUTIONS
1. | Kindly refer to MSDS for detailed safety measures while handling the paint. |
2. | Store the product in ambient conditions in well ventilated locations and away from source of ignition and fire. |
3. | Avoid eye and skin contact. In case it happens, wash with plenty of clean water. |
4. | Do not inhale or inject. In case of inhalation move to fresh air. |
5. | Use protective equipments like globes, safety glasses, face mask while handling the paint – this is required for all paint. |
6. | Do not apply when the ambient temperature is less than 100C or it might drop to this level within 4 hours of application. |
7. | Both white and tinted paints needs through shaking / mixing immediately before use. |
8. | Where ever dilution is necessary, use pure water. Adjust a viscosity of 30 – 40 sec for brush application and for other method use at 20 – 30 sec by Ford cup No. 4 |