Gamma Wallcoat Emulsion
DESCRIPTION:
Gamma WallCoat Emulsion is a trade standard performance water thinnable wall coating with a top-quality high opacity emulsion which gives excellent coverage for everyday living. With an improved in-can consistency, Gamma Wall Coat Emulsion gives a smooth flow for easy application and a high-quality finish.
USES:
Applied as a finish or undercoat paint for interior surfaces. It is recommended to use for exterior surfaces in dry and low humid climate. It can be applied on all types of smooth plasters, false ceilings and etc,
MAIN FEATURES:
- High opacity and durability along with excellent application properties.
- Excellent smoothness and
- Anti-microbial agents inhibit the growth of mold and mildew on the paint surface.
- Most trading average performance
DIRECTION OF USE
Surface Preparation (New & Old) | New Plaster surfaces to be painted should be allowed to mature at least for a period of six weeks. Remove loose particles and rub slightly with emery paper. Ensure that surface is dry and free of dust, dirt, moisture etc. In case of repainting jobs, earlier coatings of emulsion paint need not to be removed if in sound condition. Otherwise slight sanding followed by wipe & clean is necessary before application. |
Interior (New Plaster) | Sand the surface with emery paper 180 and wipe clean. Apply Gamma Economy Emulsion by brush or roller followed by Impala Wall Putty Filler using putty knife. Then do the sanding and clean the surface for applying Gamma WallCoat Emulsion paint as finish coat with a recoating* interval of 1 – 2 hours. |
PRECAUTIONS:
1. | Kindly refer to MSDS for detailed safety measures while handling the paint. |
2. | Store the product in ambient conditions in well ventilated locations and away from source of ignition and fire. |
3. | Avoid eye and skin contact. In case it happens, wash with plenty of clean water. |
4. | Do not inhale or inject. In case of inhalation move to fresh air. |
5. | Use protective equipments like gloves, safety glasses, face mask while handling the paint – this is required for all paint. |
6. | Do not apply when the ambient temperature is less than 100C or it might drop to this level within 4 hours of application. |
7. | Both white and tinted paints need through shaking / mixing immediately before use. |
8. | Use the recommended shades for exterior application. |
9 | Where ever dilution is necessary, use pure water. Adjust a viscosity of 30 – 40 sec for brush application and for other method use at 20 – 30 sec by Ford cup No. 4 |